Titanium Ti Metal Welding Round Rods Stick Bar Shaft Grade 2 GR2/ TA2 2.4mm x 1000mm / 0.094" x 39.4", 5 Pcs

Specifications:Brand: MssoommGrade: Grade 2 GR2/ TA2Diameter: 2.4mm/ 0.094 inchLength: approx. 1000mm/ 39.4 inchQuantity: 5 PcsOperation Essentials: 1.When welding, short-arc welding should be used as much as possible, with small welding heat input, and the nozzle and the welding piece should maintain an angle of 70-80 degrees.2. When welding, the welding torch basically does not swing horizontally. When it needs to swing, the frequency should be low, and the swing amplitude should not be too large.3. When the arc is broken and the weld is finished, the argon gas protection should be continued until the metal in the weld and heat affected zone is cooled to below 250 °C.Application: aviation, aerospace, chemical, shipbuilding and other industries widely used, manufacture gas turbine components.Note:1. Construction workers and welders should wear clean white gauze gloves (do not wear cotton gloves).2. The welding site must thoroughly remove surface impurities such as grease, rust and moisture.3. In order to prevent excessive oxidation of the surface of the weld bead during welding, a tail cover shall be added to increase the protection.4. Please allow small errors in the dimensions due to accidental imprecise manual measurement.5. We can customize the length, quantity and weight as you want, pls contact us.

• Low density, high specific strength.
• Good toughness and weldability series of advantages.
• For various forms of welding, weld joint strength can reach the base metal strength 90%.
• Excellent corrosion resistance, good thermal stability.
• In the aerospace, petrochemical, shipbuilding, automobile, pharmaceutical and other sectors have been widely used.